Today, all new personal computers are equipped with SSD drives as an alternative to HDD drives. You will see superlatives about them all around the professional press – they are faster and operate better and they are actually the future of home computer and laptop generation.

Nonetheless, how do SSDs perform in the website hosting community? Can they be efficient enough to replace the verified HDDs? At Domainance, we’ll make it easier to better understand the distinctions in between an SSD as well as an HDD and determine the one that best fits you needs.

1. Access Time

Image

After the release of SSD drives, file access rates are now through the roof. Due to the completely new electronic interfaces used in SSD drives, the average data access time has shrunk to a all–time low of 0.1millisecond.

Image

HDD drives make use of rotating disks for data storage applications. When a file is being utilized, you will have to wait for the correct disk to get to the correct place for the laser to view the data file involved. This ends in a regular access speed of 5 to 8 milliseconds.

2. Random I/O Performance

Image

The random I/O performance is really important for the overall performance of a file storage device. We have run substantial trials and have established an SSD can manage at the least 6000 IO’s per second.

Image

Hard drives feature slower file access rates due to the older file storage and access technique they are implementing. In addition, they display much reduced random I/O performance matched against SSD drives.

For the duration of Domainance’s tests, HDD drives dealt with on average 400 IO operations per second.

3. Reliability

Image

SSD drives are built to have as fewer rotating parts as is feasible. They use a similar technology to the one found in flash drives and are also much more dependable as opposed to traditional HDD drives.

SSDs offer an common failing rate of 0.5%.

Image

HDD drives employ rotating disks for holding and reading files – a concept since the 1950s. With hard disks magnetically hanging in the air, spinning at 7200 rpm, the possibilities of some thing going wrong are generally increased.

The normal rate of failure of HDD drives ranges amongst 2% and 5%.

4. Energy Conservation

Image

SSDs are lacking moving parts and require little or no cooling down energy. Additionally they need a small amount of power to function – trials have demonstrated they can be powered by a common AA battery.

In general, SSDs use up amongst 2 and 5 watts.

Image

From the second they have been created, HDDs have invariably been extremely power–greedy devices. So when you have a server with numerous HDD drives, this will raise the month–to–month electricity bill.

Typically, HDDs take in somewhere between 6 and 15 watts.

5. CPU Power

Image

The faster the data access speed is, the swifter the file requests can be adressed. This means that the CPU won’t have to save assets waiting for the SSD to respond back.

The normal I/O wait for SSD drives is only 1%.

Image

If you use an HDD, you must invest more time waiting around for the outcome of your file ask. It means that the CPU will be idle for further time, awaiting the HDD to react.

The standard I/O delay for HDD drives is approximately 7%.

6.Input/Output Request Times

Image

It’s about time for a few real–world instances. We, at Domainance, produced a full platform backup on a web server using only SSDs for file storage purposes. In that procedure, the normal service time for an I/O call remained beneath 20 ms.

Image

Using the same web server, however, this time loaded with HDDs, the end results were very different. The average service time for any I/O request fluctuated between 400 and 500 ms.

7. Backup Rates

Image

You can easily check out the real–world advantages of using SSD drives each and every day. As an example, with a web server loaded with SSD drives, a complete backup will take simply 6 hours.

Image

Alternatively, on a hosting server with HDD drives, the same back up could take three or four times as long to complete. An entire back–up of an HDD–equipped server typically takes 20 to 24 hours.

Should you wish to quickly improve the overall overall performance of your respective websites and never have to change just about any code, an SSD–operated hosting solution is really a good option. Have a look at the Linux hosting packages packages along with our VPS packages – our solutions include quick SSD drives and are offered at competitive prices.

  • Service guarantees

  •  
  • Register today. You won’t see any configuration charges and you’ll have total admin access to the server. 99.9% network availability is warranted.

  • Compare our prices

  •  
  • Review the tools and capabilities offered by Domainance’s Virtual Private Servers. You can begin with a cheaper VPS package and upgrade with just a click of the mouse as your requirements increase.
  • Compare our hosting plans

  • Contact Us

  •  
  • Contact us 24 hours a day by email or by making use of the super–fast ticketing platform. Our techs are going to reply to any of your questions within just 1 hour.